Conical Crusher Crushing Wall — Moving Cone Lining Plate — High-Manganese Steel Castings — Wear Parts for Crushers
Category:
Keywords:
Product Description
- 产品描述
-
Product Introduction:
The crushing wall, also known as the moving cone liner, is one of the key components of a cone crusher. It is fixed to the cone body by means of a cone head. The crushing wall of a cone crusher is typically cast from materials such as high-manganese steel. After the moving cone liner and the newly installed or replaced crushing wall have been in operation for 6 to 8 hours, their tightening condition should be checked. If any loosening is detected, it must be tightened immediately.
Performance characteristics of crusher parts
1. Quality assurance
Every stage of high-manganese steel casting production is subject to strict control procedures, and each product must undergo quality inspection by the Quality Inspection Department before leaving the factory, ensuring the quality of every cone shell that is shipped out.
2. High cost-effectiveness
The use of crushing walls in cone crushers doubles the production efficiency of cone machines, reduces investment costs associated with casting wear, and further minimizes downtime losses caused by frequent replacement of cone crusher components, thereby significantly improving the return on investment.
3. Technical Guarantee
The crushing wall components—wear parts for Duma Machinery’s crushers—can be customized to meet specific customer requirements. The products undergo scientific and rigorous processes of smelting, casting, and heat treatment, significantly enhancing their wear resistance.
4. Widely applicable
Manganese crusher liners are widely used in industrial sectors such as metallurgy, chemical engineering, building materials, power generation, and transportation, serving to perform coarse, medium, and fine crushing of various ores and rocks.
Features of the crushing wall in cone crushers
1. High performance
Through optimized cavity design and the combination of appropriate speed and stroke, this machine delivers greater work output at the same eccentric cone diameter. Consequently, compared to similar types of cone crushers, it boasts higher performance and production capacity.
2. Good product particle size distribution
By adopting the principle of laminar crushing, the proportion of cubic-shaped particles in the product is significantly increased, the amount of flaky and elongated aggregates is reduced, and the particle size distribution becomes more uniform.
3. Good stability
When non-crushable objects such as iron blocks enter the machine, the over-iron protection device will automatically release them and then reset itself automatically. The over-iron protection features a fixed return point for the discharge opening; after the foreign iron passes through the crushing chamber, the discharge opening can quickly return to its original position.
4. Easy to clean the cavity
If the crusher shuts down under load, the hydraulic cavity-cleaning system can quickly clear the crushing chamber, significantly reducing downtime.
5. High reliability
All components can be disassembled and assembled from either the top or the side, allowing the fixed-cone and moving-cone liner assemblies to be easily removed.
6. Low production costs
Thanks to its large production capacity, high reliability, and ease of maintenance, it has significantly reduced production costs.
100% matching high-manganese steel castings for the crushing wall and the roll jaw wall
Market research indicates that incorrect crusher wall dimensions in cone crushers are often caused by sellers failing to confirm specifications with buyers. To prevent this from happening, our experienced engineers will carefully inspect your part dimensions by verifying the drawings of worn parts for your cone crusher, ensuring a 100% match with your cone crusher.
Leave a message for inquiry
We highly value your feedback and inquiries. If you have any questions about our products or services, please fill out the form below, and we’ll get in touch with you as soon as possible.
Other products
Duma Machinery's main products include: mantle and concave liners, crushing walls, and distribution plates for cone crushers; jaw plates, side guards, and pressure bars for jaw crushers; lining plates for ball mills, autogenous mills, and other equipment; impact crusher hammers and impact plates; as well as hammer heads, screen bars, liner blocks, and other wear-resistant alloy steel components for metal shredders.